Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

01384 564160

Industrial Combustion Engineers

Electrical Systems

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Our Electronics and System Design Engineering facility is always ready to assist from the client's inception and the initial enquiry stage through the practical and logic aspects of design to plantside applications and final commissioning.

 

 

Each I.C.E. Control Panel and System is manufactured and pre-wired in house at our Cradley Heath premises. Prior to being installed on site, each unit is function and logic tested prior to release for installation. Thus, because of these final checks under simulated plant operating conditions, any possible fault indications are isolated and eliminated before final on site installation takes place.

Each System designed is a dedicated Unit, the advantages of this are obvious, A Combustion System and Control System matched in unison.

IET Wiring Regulations

As a matter of course, I.C.E.  carry out all site cable and distribution board installation in line with IEE 17th Edition.

The IET plays a key role in electrical installation standards and safety, and is known for its independent and trusted voice. It manages the national committee JPEL/64 and publishes the IET Wiring Regulations BS 7671:2008(2011).

5

Click any of the images to enlarge